Kontinuerlig bandslipning

Aceti ART. 76

Immediately available!!
Different sizes available!
Contact us - we will be happy to advise you!

For surface grinding and satin work on flat components
Subsequent processing of bending, spot welding, or cutting work, etc.
For the production of visible surfaces
Deburrs and rounds edges and openings

Features of the Aceti continuous belt sander ART. 76
Free standing continuous belt sander
Suitable for abrasive and non-woven belts
Belt dimension: 300 x 1900 mm
Three-phase motor: 400 V 4,6 kW
Speed range: 1500 rpm
cutting speeds: 8 m/s
infinitely variable belt feed: 1 - 10 m/min
cooling lubricant unit 70 l with filter fleece installed in the base cabinet
suction nozzle: Ø120 mm
minimum length of the components: 140 mm
Maximum height of the components: 205 mm
Maximum width of the components: 300 mm

A conveyor belt guides the components under the sanding belt
Suitable for both wet and dry machining
The use of cooling lubricant enables a better surface finish, lowers the temperature effect on the component, binds the grinding dust and provides corrosion protection
Cvl9Ttnxy8
After machining, the water runs together in the collection tray, is fed back into the settling tank via a filter fleece mat and is cleaned in the process
In addition, a filter cartridge cleans the cooling lubricant
Cooling lubricant hose with pistol for cleaning the mechanical components as well as the catch basin
If components are machined dry, the grinding dust can be extracted via an exhaust port.
Hold-downs before and after the grinding roller provide additional hold on the conveyor belt
The contact pressure of the rollers can be adjusted
The rollers are rubberized and spring-loaded
Hand wheel with scale for adjusting the material removal rate
Constant belt tension and quick belt change via pneumatic cylinder
Rubberized, spiral grooved and balanced contact roller made of aluminum
Guide roller covered with Vulkollan
Belt run is adjusted with the enclosed pin wrench with cross handle
Belt change by opening the door
Protective door with contact switch
The cooling lubricant system can be switched on if required
Nozzles wet the grinding belt with cooling lubricant
The intensity of the cooling lubricant can be adjusted by a tap
Compressed air nozzles remove grinding dust and cooling lubricant from the conveyor belt, thus increasing the adhesion of the components on the conveyor belt
Contact protection at the inlet of the machine with emergency stop function
Compressed air maintenance unit included
Extremely powerful motor for heavy duty use
Powerful and low-vibration three-phase motor
Motor suitable for continuous operation
Electric motor with mechanical brake for quick machine stop
Large bearings guarantee smooth running with low noise level
Main switch lockable

Scope of delivery:
High-quality tool set, cable and plug (CEE plug 16 A 5-pole IP 44 red)
German operating instructions and CE declaration of conformity
Abrasive belt in zircon corundum quality
Cooling lubricant
Filter fleece roll

Annonsen översattes automatiskt och vissa översättningsfel kan ha inträffat.