3D CNC ROUTER 1000x600mm

CNC-STEP High-Z S-1000

Specifications / Technical Data S-1000
CNC-Router and CNC-Engraver



This is the biggest machine of our High-Z cnc-router series. With external dimensions of approx. 1350x800mm it is still very handy.

With the High-Z 3D-cnc-routers you purchase an allround talent. If you want to clampand fix complex workpieces on the worksurface, or, or, or clamp work-pieces in a high bench vise (the cnc-machine sits on a frame-construction, is driven by 2 motors and therefore allows to be positioned above a piece to be processed).

Or if you simply want to do engraving- or drillingjobs…..you can work on a flat surface, with a pieces of sheet MDF fixed to it. Plane it once and you will be able to work with a precision of +-0,02 mm depth.

All cnc-machines are being delivered with black energy-chains on all axis, which allows a better cabling management. Also, all cnc-milling machines are equipped with an emergency stop button. An additional emergency stop you find in front of the controller.

A CE compliant commissioning of our CNC machines requires the assembly of the safety enclosure and the suction adapter.

Basic equipment of all High-Z CNC-milling machines:

Software ConstruCAM-3D limited ( from S-720 and S-400/T ) included !!
To use the software CAD CAM ConstruCAM in full screen, you need the milling software version WIN PCNC Economy upward

Contact free reference switch and emergency stop button as well as 22mm thick linear guide ways and individually adapted screw nuts !!


-----

Equipment / Productdetails:


•Drive : 4 stepping motor by Nanotec with 1600 steps/rev (1/8 Step)
•2 motors for constant tension and compression during milling operation on X-Axis
•Feed through of long workpieces possible, because there’s no belt drive at the end of the X-axle
•Guide ways X and Y axle 22 mm / Z Axis 16mm, grinded and with 61hrc hardened surface
•Ball bearings at both sides of trapezium spindles Tr. 12x3 mm flank lead
•Traverse speed of rapid feed: max. 2000 mm/min
•Technical resolution: 0,00187 mm ( 1/8 Schritt )
•Reversal error max.: +/- 30µm ( 0,03mm )
•Table size / clamping area: 1330 x 680 mm
•Traverse Paths: X=1000 mm; Y=600 mm; Z= 110 mm
•Reference- and limit switch on all axes
•Double safety emergency stop button
•Energy chain for clean cabling
•Total dinemsions incl motors: L x W x H = appr. 1350 x 840 x 500mm
•Milling Motor anchorage: Euroneck Ø43mm

•incl. Software ConstruCAM-3D limited
Zjj2nfz2
•Modular frame for universal application
•Weight appr. 51 kg
•Complete machine Included 5 driver microstep controller 5 x 3,5 Ampere (Zero3)
•An approx. 30-minute long introduction during pick up and an unlimted telephone support are included.
•An approx. 2 hours long introduction and an installation of software on your brought note-book / PC as well as a explanation of fundamental terms of Corel Draw etc. possible, too.

-----

Technical data contained in the price TÜV-certified control system, tailored to the CNC milling machine / CNC engraving machine:

• 4-Channel Stepper motor -CNC-Controller with actual SMD-Technology
• Main voltage 115 - 240 Volt / 47 - 63 Hz.
• Motor current 4 x 3,5 Ampere
• Microstep controller Resolution 1/10-Step / 2000 Steps/Rev.
• 4 Connections for 4 brushless Motor / Stepper motor
• Connection with parallel port and Software WIN PCNC Light, Economy or USB with WIN PCNC USB or
Profi version. ( Also possible:MACH3, USBCNC, NC-Easy LINUX EMC and LINUX CNC and much other
stepper driver software.)
• "Sleep-Funct