Limning enhet IMA

IMA 680 480 410 310

Spare part for IMA 680 / 480/ 980 ( 410 under reservation )

Edgebanding Unit
For edgebanding on shaped panels with fresh hot melt glue coating onto the
edging material within the machine.

Unit consisting of:
Pressure roller: 100 mm diameter
Pneumatically controlled post pressure roller: 35 mm diameter
Hot melt glue applicator for the coating of edging material with temperature control
Servo-drive for edge feeding with automatic adaptation to the path control
IR radiator 600 W at the decorated side of the edgings to support the curving of
the material in case of smaller radii
Pneumatically controlled cut-off saw
Butt-joint query


NC-axis 04.7308 swiveling area up to 740 degrees, pneumatic z-stroke 125 mm
Support 04.7325 in Y-direction for the coupling onto the main support
Edgeband length: mid. approximately 250 mm
Edgeband thickness: 0.4 mm - 3.0 mm
Height of edgeband: 14.0 - 44.0 mm

One (1): Additional NC-axis in Y-direction
For the gluing unit

One (1): Two Fold Coil Magazine with Strip Feed and Reinforced Cutting Knife
For coil material up to maximum 3 mm, moving with the support

ADAPTER UNITS FOR TOOL CHANGER:

One (1): Adapter Unit Saw
Saw taper diameter: 30 mm with 4 borings diameter 6.5 mm on
divided circle 60 mm
Saw Blade diameter: 200 mm
Clamping area: maximum 5 mm
Rotary motion: Against drive speed
Speed: Maximum 8,000 rpm (in case of continuous operation)
Cutting height: 55 mm
Spindle position: 900, fixed

One (1): Adapter Unit HorizontaliBoring Head WO3-4.4-BP
Number of spindles: four (4) (crosswise)
Tool receptacle: diameter 3 x 10H7
Clamping receptacle: 1 x ER20: for ∅ 1-13 mm
Rotary motion: rh
Speed: maximum 6,000 rpm (in case of continuous operation)
Tool diam.: maximum 12 mm

One (1): Adapter Units for Flush Milling
Tracing: Upper, lower and horizontal
Speed range: maximum 9,000 rpm
Tools: diameter 70 mm
Boring: 30 mm
Work piece thickness: minimum 16 mm with R = 3
maximum 60 mm

Nulm80i
One (1): Adapter Units for Glue Scraping
Attached to the flush trimming unit


One (1) Adapter Unit for Profile Scraper
For rescraping profiled edges with PVC-edgings, with pre-adjustable and
changeable tool receptacle for quick change of profile
Tracing: upper, lower, and horizontal
Panel thickness: minimum 16 mm with R= 3 mm
maximum 60 mm
trcnical Data under reservation. This unit was only 2 Years under working condition