BandslipmaskinLöser
FS384/150-2
Bandslipmaskin
Löser
FS384/150-2
Skick
Begagnad
Plats
Dietzenbach 

Visa bilder
Visa karta
Uppgifter om maskinen
- Maskinbeteckning:
- Bandslipmaskin
- Tillverkare:
- Löser
- Modell:
- FS384/150-2
- Skick:
- verkstadsrenoverad (begagnad)
Pris och plats
- Plats:
- Siemensstrasse 13 A, 63128 Dietzenbach, Deutschland

Ringa
Tekniska detaljer
- Effekt:
- 5,5 kW (7,48 hk)
Erbjudandets detaljer
- Annons-ID:
- A176-80888
- Uppdatering:
- senast den 12.11.2024
Beskrivning
The wet grinding machine with integrated stainless steel drip tray is used for professional processing of square tubes and flat profiles up to 150 mm wide and is suitable for grinding steel, stainless steel and non-ferrous metals.
The machine stand forms a machine unit together with the tool units and the control cabinet.
Key data of the machine:
Passage height (workpiece height): 100 mm
Maximum workpiece width: 150 mm
Sanding belt tension: Manual
Sanding belt dimensions: 2500 mm length x 150 mm width
Tool units
The two tool carriers are designed for the use of sanding belts 150 x 2500 mm. Each unit has a three-phase motor with direct drive. The drive power of each unit is 5.5 KW.
Workpiece transport
The workpieces are transported via an endless belt.
The drive is a variable speed gearbox whose feed (belt speed) is adjustable via a handwheel.
Water tank
The machine is equipped with a water tank to be placed under the machine. The water is fed from the machine's stainless steel tank after the second station via a funnel into the sedimentation tank. A feed pump, which is located in the drainage basin, pumps the water back to the units.
Hfsdpfeu Nwt Eox Aalod
Annonsen har översatts automatiskt. Översättningsfel kan förekomma.
The machine stand forms a machine unit together with the tool units and the control cabinet.
Key data of the machine:
Passage height (workpiece height): 100 mm
Maximum workpiece width: 150 mm
Sanding belt tension: Manual
Sanding belt dimensions: 2500 mm length x 150 mm width
Tool units
The two tool carriers are designed for the use of sanding belts 150 x 2500 mm. Each unit has a three-phase motor with direct drive. The drive power of each unit is 5.5 KW.
Workpiece transport
The workpieces are transported via an endless belt.
The drive is a variable speed gearbox whose feed (belt speed) is adjustable via a handwheel.
Water tank
The machine is equipped with a water tank to be placed under the machine. The water is fed from the machine's stainless steel tank after the second station via a funnel into the sedimentation tank. A feed pump, which is located in the drainage basin, pumps the water back to the units.
Hfsdpfeu Nwt Eox Aalod
Annonsen har översatts automatiskt. Översättningsfel kan förekomma.
Leverantör
Observera: Registrera dig gratis eller logga in, för att få tillgång till all information.
Registrerad sedan: 2008
76 Annonser online
Skicka förfrågan
Telefon & Fax
+49 6074 ... annonser
Din annons har raderats framgångsrikt
Ett fel har uppstått






