Filter housing with briquetting press

Nestro FNFHSU 9/9 inkl. C 150 Brikettierpresse

Used Equipment

Year of Manufacture: 2011

Condition: Currently installed

Equipment and Technical Data:

-Filter housing base ring NFHSU 9/9 with discharge chute for press
- Discharge: 1.1 kW
- Storage volume in the base ring approx.: 3.25 m³
- Dimensions L x W x H (incl. base ring) 2440 x 2440 x 900 mm
- Ground clearance: 350 mm
- Conveyor screw for briquetting press 0.75 kW
- Extension and expansion rings are optional; max. storage volume approx. 12 m³
- Extension and injection ring NFHSU for 9/9 and 10/10 Jet, L x W x H: 2480 x 2480 x 500 mm
- Expansion ring for NFHSU 9/9, 2480x2480x700 mm, with inspection door and type-tested explosion flap
- Filter for filter housing NFHSU 9/9/20, filter area 116 m²:
The Nestro filter system NFHSU is a solid filter construction made of 4 mm galvanized steel sheet and is designed for outdoor installation and weather resistance. This filter system is particularly robust and designed for underpressure operation up to -3,500 Pa. The filter system is equipped with upper and lower inspection doors 600 x 600 mm, with automatic filter regeneration, dry extinguishing system, differential pressure switch / volumetric flow monitoring and the necessary explosion protection.
Note: Filter is equipped with high-quality filter material, BIA category M, antistatic, residual dust content < 0.1 mg/m³ and suitable for return air operation.
Further technical data:
- Filter tube length: 2,000 mm
- Filter tube diameter: 230 mm
- Number of filter tubes: 81
Bsdezvz Tbopfx Ag Teww
- Filter area: 116.0 m²
- Filter regeneration: automatic/motorized
- Number of vibrating motors: 4 pcs
- Fan shroud for NFHSU 9/9 including inspection door
- Fan US-FHN (clean gas) 22 kW 16,400 m³/h - 3,200 Pa:
A Nestro high-performance fan with above-average efficiency and high energy saving potential when using a frequency inverter (optional). The robust welded construction is primed and painted in RAL 5015. The fan is delivered as standard with an inlet cone and backflow damper.
Technical data at a glance:
- Volumetric flow: 16,400 m³/h
- Corresponding underpressure: 3,200 Pa
- Electric motor: 22 kW / 400 Volt / 50 Hz
- Speed: 3,000 rpm
- Design: B5
- Pressure nozzle: without
- Application area: Nestro underpressure filter and others

- Injection nozzle d= 400 mm with flange ring
- Injection nozzle d= 350 mm with flange ring
- Backflow damper d= 350 mm with flange edge
- Backflow damper d= 400 mm with flange edge

- Briquetting press C150; 30 - 50 kg/h, hydraulic unit 5.5:
Technical data:
- Power consumption (hydraulics): 5.5 kW
- Briquette diameter: 50 mm
- Weight: 650 kg
- Briquetting performance with a bulk density of approx. 250 kg/m³, material-dependent: 30 - 50 kg/h
- Ground clearance with base frame (art. no. 710300): 350 mm
- Briquetting press, dust-proof
- Briquetting press complete with hydraulic solenoid valve control for automatic operation, oil tank with 100 l oil, in welded construction, including main cylinder, stuffing cylinder, gripper cylinder, pressing jaw, electrical control panel with fully automatic control and 5 m cable
The press is standardly equipped with: Monitoring switch for oil temperature, hardened press bushing, connection part for briquette line and automatic briquette length adjustment

Annonsen har översatts automatiskt. Översättningsfel kan förekomma.