Överbandsmagnet Blockmagnet Magnetisk skiva

mütek Hawk-Eye

Extremely strong industrial magnet for iron separation
Special price 970 € net (shipping 14,90 € net)
*the lengths can be seen in picture 2

The active side has a stainless steel end plate (material 1.4301).
There are threaded holes on the back for mounting *handle available on request
Gbjlhccstqfhxoqmop

The block magnet systems can be used up to a maximum operating temperature of + 100 °C.
The magnet surface should be regularly cleaned of any trapped iron parts.

Starting heights for all types e.g.
For a steel nut M5 approx. 60 mm
For an M5 x 30 screw approx. 100 mm

Installation example 1:
Mounted above a conveyor belt, the iron parts "jump to the holding surface of the magnet".

Installation example 2:
Mounted in a piping system with direct contact to the material flow. For a high level of separation safety, it is possible to install several block magnets in a cascade, one behind the other.

Installation and safety instructions:
When handling, unpacking and then installing, make sure that there are no loose iron parts such as tools or screws in the vicinity.

The magnetic attraction is so strong that painful injuries can occur if fingers come between iron parts and the active surface. There should be no steel parts within a minimum distance of 400 mm below the active surface.

Annonsen översattes automatiskt och vissa översättningsfel kan ha inträffat.