Beverage van

ET 35*Rollladenaufbau *1,2 to NL*B-Führerschein

* ORTEN CityRollup body
* All-aluminum body with segmented roll-up doors
* 2 compartments at 2,057 mm + 2 compartments at 1,320 mm
* DEKRA certified according to VDI 2700 ff and DIN EN 12642 XL
* Range approx. 200 km
* Battery: Lithium Iron Phosphate
* Battery capacity: 80 kWh, 400 V
* Leaf spring suspension

ORTEN Electric Trucks E 35 with roll-up door body:

Pricing takes subsidies into account.

Technical data chassis:
Manufacturer: ORTEN
Vehicle class: N2
GVW: 4,250 kg (driver's license class B)
Unladen weight: 2,295 kg
Wheelbase: 3,745 mm
Tires: 185/75 R 16C

Equipment:
Seats: 1+2
* Rear axle ratio i = 4.1
* Rear axle stabilizer
* Disc brakes front
* Drum brakes rear
* Driver airbag
* Fog lights
* Heat-insulating glass
* Driver's seat, "Luxury" version
* Central locking
* Electrically adjustable exterior mirrors
* Storage compartments in the front doors, left and right
* Multimedia 2DIN with USB port
* Hands-free system
* ABS
* Summer tires
* Spare wheel, supplied loose
* Wheel chocks with holder (vehicle class N2)
* Cab color similar to signal white RAL 9003
* Chassis color: graphite black
* Rim color: silver
Csdpsqz R Dmofx Ag Tehd
* Warning triangle
* First-aid kit
* Hazard warning lights
* Operating manual

Technical data of the conversion:
* Maximum speed: 85 km/h
* Range: approx. 200 km
* Battery: Lithium Iron Phosphate (LFP), nickel and cobalt-free
* Battery capacity: 80 kWh, 400 V / DC
* Charging connector: Type 2 Mode 3 / AC / IEC 62196
* Charging time: approx. 3.5 hours at 400 volts / 22 kW AC
* Electric motor: Synchronous electric motor, water-cooled
* Motor power: 70 kW / peak 92 kW
* Torque: 410 Nm / peak 730 Nm

Technical equipment:
* Regenerative braking power
* 22 kW on-board charger AC
* DC/DC on-board power converter
* Electric power steering assistance
* BMS-CAN-BUS-controlled charging technology
* Electric 5 kW HV cab heater
* Color display, showing all relevant battery, BMS, motor and control data
* Diagnostic menu for motor control and BMS integrated in the information display
* Diagnostic menu for battery cell monitoring integrated in the information display
* Structural elements in stainless steel
* Battery heating system HV 400 volts / DC (only in charging mode)
* Vehicle acceptance test according to § 13 EG-FGV / ECE R100

ORTEN City Rollup body

Body dimensions:
Overall length: approx. 3,600 mm, floor slope: 0 mm
Overall height: approx. 2,360 mm, compartment width: front 2057 / rear 1320 mm
Overall width: approx. 2,200 mm, compartment height: 1575 mm

Aluminum roll-up doors:
Roll-up with spring assistance. Rubber band for pulling down the roll-up doors. In the closed position, the doors are centrally secured by a locking handle, which is mounted on each side of the front panel and can be locked with a padlock.

Pallet stop:
Pallet stop approx. 20 mm on the outer edge of each compartment, welded to prevent goods from sliding against the door.

Underrun protection:
Original chassis underrun protection is used.

Rear wall:
Fixed rear wall. Double-walled, clad with aluminum with a smooth surface.

Painting:
Exterior of the body painted in RAL color. Lettering can be done according to specifications for an additional charge.

Side steps:
The side underrun protection consists of running boards with a non-slip surface for the driver. Steps along the body on both sides of the vehicle, between the axles and behind the rear axle.

Annonsen har översatts automatiskt. Översättningsfel kan förekomma.