CNC-svarvOkuma
LB15
CNC-svarv
Okuma
LB15
fast pris exklusive moms
13 500 €
Tillverkningsår
1998
Skick
Begagnad
Plats
Neubrandenburg 

Visa bilder
Visa karta
Pris och plats
fast pris exklusive moms
13 500 €
- Plats:
- Gerstenstraße 2, 17034 Neubrandenburg, DE
Ring
Erbjudandets detaljer
- Förtecknings-ID:
- A115-21757
- Senast uppdaterad:
- den 2024.08.02
Beskrivning
CNC turret lathe
Okuma LB15
immediately available
The OKUMA LB 15 CNC lathe has been professionally serviced regularly since it was purchased and is in perfect technical condition. It has a hydraulic chuck with a diameter of 250 mm and a turret mount for 12 tools. The lathe spindle rotates at a speed of 70-3800 rpm and has a diameter of 75 mm.
Specifications of the OKUMA LB-15 CNC lathe
– CNC control: OSP 5000L-G CNC system (German)
– Data transmission: RS232
– Tool turret: 12-position type BOLT ON
– Lathe chuck: 250 mm
– Spindle: 70-3800 rpm. (11 kW, 30 min; 7.5 kW – continuous operation)
– non-continuous spindle
– Spindle bore diameter: fi 75 mm (at a depth of 70 mm, measured from the face of the lathe chuck and without jaws)
– Spindle bore diameter: fi 28 mm (at a depth of 200 mm, measured from the face of the lathe chuck and without jaws)
– X-axis travel: 400 x 0.001 mm
– Z-axis travel: 500 x 0.001 mm
– Cutting speed XZ: 0.01-1000 mm / rev
– XZ feed: 12,000 mm / min.
Dcjdpfjm Ux A Sox Aa Sen
– Power supply: 3 x 400V
– Machine rated power: 21 kVA
– maximum load current: 36A
– Machine dimensions (width x depth x height): 2.9 (3.9 m with chip conveyor) x 1.8 x 1.72 m
– Machine weight: 4500 kg
NC control OKUMA OSP 5000 L-G
very good repeatability
with chip conveyor
The machine can be inspected at any time
Timely, insured delivery with forwarding agency possible
Inexpensive financing / installment purchase possible
Okuma LB15
immediately available
The OKUMA LB 15 CNC lathe has been professionally serviced regularly since it was purchased and is in perfect technical condition. It has a hydraulic chuck with a diameter of 250 mm and a turret mount for 12 tools. The lathe spindle rotates at a speed of 70-3800 rpm and has a diameter of 75 mm.
Specifications of the OKUMA LB-15 CNC lathe
– CNC control: OSP 5000L-G CNC system (German)
– Data transmission: RS232
– Tool turret: 12-position type BOLT ON
– Lathe chuck: 250 mm
– Spindle: 70-3800 rpm. (11 kW, 30 min; 7.5 kW – continuous operation)
– non-continuous spindle
– Spindle bore diameter: fi 75 mm (at a depth of 70 mm, measured from the face of the lathe chuck and without jaws)
– Spindle bore diameter: fi 28 mm (at a depth of 200 mm, measured from the face of the lathe chuck and without jaws)
– X-axis travel: 400 x 0.001 mm
– Z-axis travel: 500 x 0.001 mm
– Cutting speed XZ: 0.01-1000 mm / rev
– XZ feed: 12,000 mm / min.
Dcjdpfjm Ux A Sox Aa Sen
– Power supply: 3 x 400V
– Machine rated power: 21 kVA
– maximum load current: 36A
– Machine dimensions (width x depth x height): 2.9 (3.9 m with chip conveyor) x 1.8 x 1.72 m
– Machine weight: 4500 kg
NC control OKUMA OSP 5000 L-G
very good repeatability
with chip conveyor
The machine can be inspected at any time
Timely, insured delivery with forwarding agency possible
Inexpensive financing / installment purchase possible
Leverantör
Observera: Registrera dig gratis eller logga in, för att få tillgång till all information.
Registrerad sedan: 2022
Skicka förfrågan
Telefon & Fax
+49 160 9... annonser
Dessa annonser kan också vara av intresse för dig.
småannons

1 121 km
CNC-svarv
OKUMALB 15
OKUMALB 15
småannons

1 914 km
SVARVAR - CNC
OKUMALB 15 II
OKUMALB 15 II
småannons

1 121 km
CNC-svarv
OkumaLB 15/LB 15 M/LB 15 W
OkumaLB 15/LB 15 M/LB 15 W
småannons

1 121 km
Horisontell svarvmaskin
OkumaLB15II
OkumaLB15II
småannons

1 110 km
CNC-svarv
Okuma LB15LB 15
Okuma LB15LB 15
småannons

1 796 km
Cnc-svarv
OkumaLB15II-MW
OkumaLB15II-MW
småannons

1 121 km
CNC-svarv
OKUMALB 15 M
OKUMALB 15 M
småannons

1 222 km
CNC-svarv
OKUMALB 15 II
OKUMALB 15 II
småannons

1 121 km
CNC-svarv
OKUMALB 15
OKUMALB 15
Din annons har raderats framgångsrikt
Ett fel har uppstått